Top Tips & Expert Views
Key types of tyre repair
Posted by Site Admin on
Our expert discusses three key types of tyre repair.
- Tags: tire repair, truck, tyre repair, vulcanisation
Extruders - dos and don'ts
Posted by Site Admin on
Hand held extruder guns are commonly used to rapidly fill a hole or skive with raw rubber compound during the tyre repair process. How they work Uncured rubber compound formed into a long continuous rope is fed into the pneumatically driven worm drive which is mounted at the front of the gun. This is warmed enough to reduce the rubber viscosity but not enough to start the curing process. Under great pressure the warmed compound is then extruded out of the end of the gun so it can be directed to fill the skive without any air bubbles being trapped...
- Tags: Extruders, Top tips, tyre repair
Top tips to keep your pneumatic tools in top condition
Posted by Josh De Carteret on
A full how to guide on tips to keep your pneumatic tools in top condition
Extruder Gun Care: Why Water / Oil Separators Matter
Posted by Josh De Carteret on
Extruder gun care: why water/ oil separators matter: Regardless of the kit, a water/ oil separator should always be used with any pneumatic tooling.
- Tags: article, blog, guide, tire repair, tyre repair
Expert view: Achieving the best quality tyre repair
Posted by Site Admin on
Perfect repairs extend tyre lifespan and are therefore critical for budget efficiency.
So how do you achieve top quality every time?
- Tags: earthmovers, tire repair, truck, tyre repair, vulcanisation